Juniper JN0-694 exam study materials

If you want to choose passing Juniper certification JN0-694 exam to make yourself have a more stable position in today's competitive IT area and the professional ability become more powerful, you must have a strong expertise. And passing Juniper certification JN0-694 exam is not very simple. Perhaps passing Juniper certification JN0-694 exam is a stepping stone to promote yourself in the IT area, but it doesn't need to spend a lot of time and effort to review the relevant knowledge, you can choose to use our ITCertKing product, a training tool prepared for the IT certification exams.

ITCertKing is a website to achieve dreams of many IT people. ITCertKing provide candidates participating in the IT certification exams the information they want to help them pass the exam. Do you still worry about passing Juniper certification JN0-694 exam? Have you thought about purchasing an Juniper certification JN0-694 exam counseling sessions to assist you? ITCertKing can provide you with this convenience. ITCertKing's training materials can help you pass the certification exam. ITCertKing's exercises are almost similar to real exams. With ITCertKing's accurate Juniper certification JN0-694 exam practice questions and answers, you can pass Juniper certification JN0-694 exam with a high score.

Let me be clear here a core value problem of ITCertKing. All Juniper exams are very important. In this era of rapid development of information technology, ITCertKing just one of the questions providers. Why do most people to choose ITCertKing ? Because the ITCertKing exam information will be able to help you pass the test. It provides the information which is up to date. With ITCertKing Juniper JN0-694 test questions, you will become full of confidence and not have to worry about the exam. However, it lets you get certified effortlessly.

Juniper certification JN0-694 exam is the first step for the IT employees to set foot on the road to improve their job. Passing Juniper certification JN0-694 exam is the stepping stone towards your career peak. ITCertKing can help you pass Juniper certification JN0-694 exam successfully.

If you don't purchase any course, although you spend a lot of time and effort to review of knowledge to prepare for Juniper certification JN0-694 exam, it is still risky for you to pass the exam. But selecting ITCertKing's products allows you to spend a small amount of money and time and safely pass the exam. I believe that ITCertKing is more suitable for your choice in the society where time is so valuable. Moreover, our ITCertKing a distinct website which can give you a guarantee among many similar sites. Choosing ITCertKing is equivalent to choose success.

Those who want to prepare for the IT certification exam are helpless. But they have to do it. So they have restless state of mind. However, With ITCertKing Juniper JN0-694 exam training materials, the kind of mentality will disappear. With ITCertKing's Juniper JN0-694 exam training materials, you can be brimming with confidence, and do not need to worry the exam. Of course, you can also face the exam with ease. This is not only psychological help, but more importantly, it allows you to pass the exam and to help you get a better tomorrow.

Exam Code: JN0-694
Exam Name: Juniper (Enterprise Routing and Switching Support, Professional (JNCSP-ENT))
One year free update, No help, Full refund!
Total Q&A: 36 Questions and Answers
Last Update: 2013-11-22

In order to meet the needs of each candidate, the team of IT experts in ITCertKing are using their experience and knowledge to improve the quality of exam training materials constantly. We can guarantee that you can pass the Juniper JN0-694 exam the first time. If you buy the goods of ITCertKing, then you always be able to get newer and more accurate test information. The coverage of the products of ITCertKing is very broad. It can be provide convenient for a lot of candidates who participate in IT certification exam. Its accuracy rate is 100% and let you take the exam with peace of mind, and pass the exam easily.

JN0-694 Free Demo Download: http://www.itcertking.com/JN0-694_exam.html

NO.1 Your Junos device is dropping certain traffic flows, while allowing other traffic flows to pass
through the device unaffected.
Which CoS component is causing this problem?
A. BA classification
B. RED
C. MF classification
D. Rewrite rules
Answer: D

Juniper   JN0-694   JN0-694 answers real questions   JN0-694 pdf   JN0-694 certification training

NO.2 You observe that a router is using an unusually high amount of CPU cycles.
You determine that continuous SPF calculations in OSPF are being performed.
What are two reasons for this problem? (Choose two.)
A. The wrong authentication keys between the OSPF neighbors are used.
B. The interface MTU is mismatched between the OSPF neighbors.
C. There are duplicate router IDs within the OSPF area.
D. An OSPF adjacency is flapping.
Answer: C,D

Juniper   JN0-694 exam simulations   JN0-694

NO.3 You are implementing Q-in-Q tunneling on an EX Series switch. You want the tunnel to support
all C-VLANs; however, only some VLANs are able to send traffic across the tunnel.
Switch-1 has the following configuration:
[edit vlans]
user@Switch-1# show
v100 {
vlan-id 100;
interface {
ge-0/ 0/ 0.10;
ge-0/ 0/1.20;
}
dot1q-tunneling {
customer-vlans [ ];
}
}
What would solve this problem?
A. Add family ethernet-switching to the tunnel-side interface on Switch-1.
B. Implement RSTP .
C. Q-in-Q tunneling will not work in this scenario; use a Layer 2 VPN instead.
D. Remove the customer-vlans statement.
Answer: C

Juniper   JN0-694   JN0-694   JN0-694 exam   JN0-694 dumps

NO.4 Your switch is experiencing a problem where a port that should have only one host connected
occasionally shows that multiple MAC addresses are being learned.
Which configuration setting would ensure that no extra hosts can join the network using this switch
port?
A. mac-limit
B. no-mac-learning
C. persistent-learning
D. bpdu-block-on-edge
Answer: D

Juniper   JN0-694 exam dumps   JN0-694 certification   JN0-694 study guide   JN0-694

NO.5 Two neighboring routers are able to form an OSPF adjacency, but are not able to establish an
IBGP neighborship.
What are two reasons for the IBGP neighborship problem? (Choose two.)
A. One of the devices has a misconfigured BGP peer address.
B. One or both of the connected interfaces are missing the family iso statement.
C. OSPF has a lower route preference than BGP .
D. A firewall filter on one of the interfaces is blocking TCP traffic.
Answer: B,C

Juniper study guide   JN0-694 original questions   JN0-694   JN0-694 dumps

NO.6 Your Layer 2 network uses VLAN IDs 100 through 400 and you are required to load-balance
these VLANs between two different root bridges. You are currently using the default RSTP settings
and notice that all VLANs are using the same root bridge.
How do you ensure the VLANs are load-balanced between two root bridges?
A. Configure MSTP with two MSTI regions and split the VLAN range between them.
B. Configure VSTP with two VLAN groups and split the VLAN range between them.
C. Configure two RSTP instances and split the VLAN range between them.
D. Configure STP and RSTP and split the VLAN range between them.
Answer: A

Juniper answers real questions   JN0-694   JN0-694 test questions

NO.7 You are having problems redistributing RIP routes into OSPF. Your Junos device has the
following configuration:
[edit protocols ospf]
user@router# show
import my-policy;
area 0.0.0.0 {
interface ge-0/ 0/ 0.0;
interface ge-0/ 0/ ;
interface ge-0/ 0/ {
passive;
}
}
What would resolve the problem?
A. Apply my-policy as an export policy under the [edit protocols rip] hierarchy.
B. Apply my-policy as an import policy under the [edit protocols rip] hierarchy.
C. Apply my-policy as an export policy under the [edit protocols ospf] hierarchy.
D. Use the area-range parameter instead of a routing policy.
Answer: D

Juniper   JN0-694   JN0-694   JN0-694

NO.8 You are troubleshooting a problem where an OSPF adjacency between two neighboring
routers will not form.
What are two reasons for this problem? (Choose two.)
A. One or both of the connected interfaces are missing the family inet statement.
B. One or both of the connected interfaces are missing the family iso statement.
C. The connected interfaces are not on the same subnet.
D. Another IGP is running on one or both of the routers, overriding OSPF.
Answer: B,D

Juniper pdf   JN0-694   JN0-694   JN0-694

ITCertKing offer the latest E20-553 exam material and high-quality 000-225 pdf questions & answers. Our 70-342 VCE testing engine and 000-622 study guide can help you pass the real exam. High-quality 000-652 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-694_exam.html